10 × 14 frame size
A 10×14 nominal frame uses a 10×14-inch insert reference, equal to 25.4×35.56 cm. Its 5:7 ratio matches a 5×7 photo, while its mat window, actual back opening and outside frame measurements remain separate specifications.
Artwork is the full sheet. Nominal frame size is the stated insert reference. The visible opening is the area left after the frame lip or mat covers the edges. Actual frames, mats, rabbets and listed openings vary by manufacturer; these dimensions do not guarantee fit, preservation, hanging safety, load capacity or compatibility.
10 × 14 inches in cm, mm and both orientations
| Measurement | Portrait / listed order | Landscape / reversed order |
|---|---|---|
| Inches | 10 × 14 | 14 × 10 |
| Centimeters | 25.4 × 35.56 | 35.56 × 25.4 |
| Millimeters | 254 × 355.6 | 355.6 × 254 |
| Aspect ratio | 5:7 | 7:5 |
Swapping width and height changes portrait to landscape without changing area. Product features determine which orientations a particular frame supports. A matching ratio preserves shape when scaling an image; it does not make different physical sheet sizes interchangeable.
Without a mat: start with the full 10 × 14 sheet
Compare a frame described for a 10 × 14-inch insert. Measure any printed paper margin as part of that sheet. Do not subtract the front lip from the artwork dimensions unless the supplier explicitly asks for a visible-window measurement. The back opening, depth and clearance must come from the specific product; no universal rabbet allowance is assumed here.
Double a 5×7 photo without changing its proportions
Multiplying both edges of a 5×7 image by two produces 10×14 and multiplies its area by four. It preserves the image shape, subject to the actual pixel dimensions and printing choices. An 8×10 source has different proportions: fitting it within a 10×14 sheet gives 10×12.5, while filling the sheet requires an 11.2×14 scaled image with width cropped. Decide the printed image treatment before considering any additional mat coverage.
Doubling the print does not simply double every mat measurement
A 5×7 picture with a 4.75×6.75 window in an 8×10 board has 1.625-inch borders. Doubling both the sheet and board to 10×14 and 16×20 while retaining the same ⅛-inch overlap gives 3.125-inch borders, not 3.25. The overlap was held constant rather than doubled. Use the actual new window dimensions when comparing a larger version of an existing display.
10×13 and 10×14 are different full-sheet references
A 10×13 sheet is 1 inch shorter. A frame described as 10×14 with a mat for another picture may have a window smaller in both directions, so the extra inch does not identify a usable window by itself. For a full 10×14 sheet, the 14×18 and 16×20 board scenarios add equal amounts to each dimension and yield equal modeled borders.
With a mat around a full 10 × 14 print
These centered examples use ⅛ inch overlap on each artwork edge, producing a 9.75 × 13.75-inch window. This is an editable illustration, not a prescribed cut. Board sizes are comparison scenarios, including possible custom dimensions; stock availability is not asserted.
| Outer board / nominal frame (in) | Window (in) | Left / right border (in) | Top / bottom border (in) |
|---|---|---|---|
| 14 × 18 | 9.75 × 13.75 | 2.125 | 2.125 |
| 16 × 20 | 9.75 × 13.75 | 3.125 | 3.125 |
Window = artwork − 2 × overlap
Centered border = (outer board − window) ÷ 2
Open this 14 × 18 mat example in the calculator to change the board or overlap. Some suppliers take artwork dimensions and make their own deduction; others want the final window size.
Smaller artwork inside a 10 × 14 outer board
This reverses the question: keep the nominal frame at 10 × 14, then compare smaller pictures. It is useful when a listing says “matted to” a smaller photo size. These are calculated scenarios, not a claim about an included mat.
| Full artwork (in) | Window (in) | Left / right border (in) | Top / bottom border (in) |
|---|---|---|---|
| 5 × 7 | 4.75 × 6.75 | 2.625 | 3.625 |
| 8 × 10 | 7.75 × 9.75 | 1.125 | 2.125 |
Before comparing a frame listing
- Confirm the full sheet and the portion of the image that must remain visible.
- Identify the nominal insert, outer mat board and exact cut window separately.
- Request the actual back opening, rabbet depth and manufacturer tolerances. Width and height alone cannot establish suitability for thick artwork.
- Use the listed outside dimensions for a visual gallery layout; these tables do not provide them.
Questions about 10 × 14 frames
Can I enlarge 5×7 to 10×14 without a ratio crop?
Yes. Both are 5:7, with a scale factor of two along each edge. That calculation does not guarantee resolution or describe margins added by a printer.
What does “14×10” mean in a frame title?
It is the landscape order of the 10×14 nominal rectangle. Use 35.56×25.4 cm when writing the corresponding metric dimensions in that order.
Does a 10×14 label specify the visible picture area?
It may name the intended insert. A frame lip or included mat can leave a smaller visible area, so check the manufacturer’s field labels and measured opening.
Compare related frame sizes
Return to the frame-size directory · Work backward from a frame you already own · Understand mat terminology